Galvanized Microwave Antenna And Communication Self Supporting Tower

Galvanized Microwave Antenna And Communication Self Supporting Tower

4 Legged Angular Steel Tower

 

What Is 4 Legged Angular Steel Tower?

 

4 legged angular steel tower is a kind of self-supporting communication tower，It can also be called 4 legged angular steel communication tower, telecommunication tower, antenna tower.

 

4 legged angular steel tower are higher steel structures used all over the world for communication applications. Their function to support antennas for telecommunications, broadcasting and WIFI internet. 4 legged angular steel tower is usually come with pre-designed accessories, just like platforms, ladders with cable tray, antenna brackets, aviation light brackets and fall prevention device, etc.

 

4 legged angular steel tower are based on either ground or building, and they are commonly designed in trusses structure to carry the wind loads and seismic loads. 4 legged angular steel tower is easy to process, transport and install. The overall rigidity of the angle steel tower is large, the bearing capacity is strong, and the technical application is mature.

 

Highlights of JIAYAO self-supporting tower

● Leading design concept.

● Versatility, modular design, flexible configuration of accessories.

● Tower group design, modification and adjustment.

● The tower section is universal, and the same tower section taken from the same mother tower is completely common in different tower types.

● Lower costs.

● Self-supporting tower light weight.

● Self-supporting tower installation cost is good.

● Self-supporting tower installation time is short.

● High reliability.

● The design and processing of JIAYAO's self-supporting tower products are in line with ISO 9001:2000 quality management system.

● 50 years design life.

 

What Is The Details of JIAYAO 4 Legged Angular Steel Tower?

Design standard

TIA/EIA-222-G/F

Welding standard

AWS D1.1

Galvanization standard

ASTM A123

Design Wind Speed

Up to 200 km/h

Angular steel

Material quality

Mild Steel:Q235B/ASTM A36/S235JR

High Steel:Q345B/ASTM A572/S355JR

Allowable deflection

0.5 ~1.0 degree

Bolt grade

Gr 4.8, Gr 6.8, Gr 8.8

Marking

Hydraulic Press Stamping

What is the height of JIAYAO 4 Legged Angular Steel Tower we can provide?

 

50m up to 120m is the tower height we can provide.

 

What antenna can be mounted on JIAYAO 4 Legged Angular Steel Tower?

 

Type of antenna

Description

Panel antenna (sector antenna)

GSM antenna for 5G:2.52m×0.265m×0.13m, 1.31m×0.32m×0.11m

Parabolic reflector(dish antenna)

Microwave antenna Diameter:0.6m, 0.9, 1.2m, 1.6m, 1.8m, 2.4m

RRU

Radio Remote Unit:0.45m×0.32m×0.25m

WIFI antenna

Grid or parabolic directional antenna / yagi / omnidirectional antennas

Other Antenna

VHF/UHF Dual-band Antenna FM antenna

 

More information please click here.

Comments

Post a Comment

Popular posts from this blog

Four Types of Communication Towers

Image
  With the growing popularity of mobile phones over the last 15 years, you can now find communication towers almost everywhere. However, it is important to note that not all mobile phone towers are the same. There are four different types of  communication towers  that can be used to transmit cellular signals. Different types of mobile phone towers can be installed for specific purposes.   Guyed Tower A guyed tower is a light- to heavy-weight communication tower constructed with straight rods aligned in a triangular form, but supported with wires at all angles.   Guyed towers are especially tall, reaching heights as high as 2,000 feet, and are typically used to hold antennas high off the ground allowing for greater signal strength and cell reception.   In addition to cellular use, they can also serve for radio and television purposes. They are ideal for rural customers who require maximum height at an economical cost.   Monopole Towers A single tubular...
Read more